Tristar VE-5933 Mode D'emploi page 6

3) Screw
4) Motor
5) Nut
6) Plastic washer
7) Bolt
8) Rear guard
9) Nut
10) Stand
11) Screw
12) Power supplycord
13) Switch box
14) Nut
15) Screw
RULES FOR SAFE OPERATION
1 Use correct voltage.
2. Never insert fingers, pencils, or any other object through the guard when fan
is running.
3. Disconnect tan when moving from one location to another.
4. Disconnect tan when removing guards for cleaning.
5. Be sure fan is on a stable surface when operating to avoid overturning.
6. Do not use fan outdoors.. Rain may create electrical hazard.
7. If the appliance or cable is damaged do not use it before it has been
repaired by a qualified person.
OPERATING INSTRUCTIONS
1. Plug the power cord into a wall outlet (AC 220 Volts- 50 Hz).
2. Adjust the speed by rotating the switch: 0 = stop 1 = Low 2 = Medium 3 =
High
GUIDE TO BETTER FAN MAINTENANCE
1. Use in a dry place, free of excessive humidity and water
2. Keep fan clean, Wiper away dirt with a clean cloth;
3. Do not use gasoline or thinner.
4. Before putting the fan in storage clean thoroughly; cover with a vinyl bag
and store fry a dry place.
This product is manufactured to comply with the radio interference
requirements of the Council Directive 82/499EEC, The manufacturer declines
all responsibility in case of accidents caused by any misuse or negligence.
Modo de Utilização dos Ventiladores
Manual de Instruções
VENTILADOR
VE-5933
6
.