Charging Battery Pack [3]; Light And Battery Capacity Indicator; Settings; Changing Direction Of Rotation [1-3] - Festool BHC 18 Li Guide D'utilisation

2
Inserting battery pack
click
Removing battery pack
2
Consider the pictures on the fold-out page.

Changing direction of rotation [1-3]

• Switch to the left = clockwise rotation
The LED automatically indicates the charging state
of the battery pack (not NiCd and NiMH battery
packs) when the on/off switch [1-4] is pressed.
BP/C 18
1

Settings

• Switch to the right = counterclockwise rotation
Hammer drilling
Screwdriving/drilling

Charging battery pack [3]

Light and battery capacity indicator

The LED on the lamp [1-10] is both a light
and a battery capacity indicator [1-9].
LED green – lit continuously:
charged > 60 %
LED green – flashing slowly:
charged 30 % – 60 %
LED green – flashing quickly:
charged 0 % – 30 %
LED yellow – lit continuously:
battery is empty
LED red – lit continuously: bat-
tery, electronics or motor tem-
perature is outside the
permitted range.
LED red – flashing: indicates a
general fault, e.g. incomplete
contact, short circuit, battery
pack faulty, etc.

Selecting the operating mode

Set selector switch [1-5] to hammer sym-
bol.
Set selector switch [1-5] to drill symbol.
11