Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operator menu operation
Press the enter button once to open the operator menu. The
following keys are used to navigate through the menus:
5 - Option/previous menu Return to the previous menu
6 - Minus Go to the next menu option
7 - Plus Go to the previous menu option
8 - Enter button Select or activate the selected option
Stand-by
This option switches the (R)LCD monitor to standby mode.
(green power led on during standby) Press the enter button
to switch power on. When in standby mode, if the operator
pushes the camera select button (button 1) the display is
returning to manual control of the cameras and allow the user
to manually scroll through the installed cameras. The Standby
mode is also adjustable via service menu → System settings
→ keyboard, see page 6.
Info
This option shows Orlaco (R)LCD monitor information. If
the user does not press any buttons for 5 seconds, the (R)
LCD monitor will display the current function of the selected
menu option. The user menu can be disabled in the service
menu. Check in this screen your software version which is
described in this manual.
Service menu operation
To open the service menu, press the plus, minus and camera
buttons at the same time. The screen (as shown on the left)
will be visible. The following buttons can be used to navigate
through the menu:
5 - Option/previous menu: Return to the previous menu
6 - Minus: Go to the next menu option
7 - Plus: Go to the previous menu option
8 - Enter button: Select or activate the selected option Push
the enter button to activate the 'Camera settings' menu. When
entering the menu, use the minus and plus buttons to select
the camera to configure and press the enter button. The yellow
cursor now jumps to the list of items. Use the minus and plus
buttons to select the item to adjust, and press the enter button.
If the selection option is an on/off switch, it will toggle between
on and off. If the option is a numeric value, it is now possible
to change the value with the minus and plus buttons, press the
enter button to store the new setting.
The 'Camera settings' menu offers the following possibilities:
Mirror
Enable this option to mirror the image (left/ right).
Upside down
This option reverses the image (flips it upside down).
4
Usermanual
objects
in
monitor are
closer than
they appear
Buttons 1
2
3
4
5
6
7
8
UM0208201 R3-5
Publicité
Table des Matières
