3M M1500SS Guide D'utilisation page 25

3M™ MicroTouch™ Display M1500SS User Guide
Rear Edge of Base Not
Shown
0.39" (10 mm)
M1500SS Base Plate Mounting Template
3M Touch Systems Proprietary Information
Place this template on mounting surface and drill three holes as shown for mounting screws.
The screw heads must be smaller than 0.38" (10 mm) and larger than 0.21" (5.5 mm).
Adjust height of screw heads to securely lock monitor in place. This height is about 0.23" (6 mm).
3M Touch Systems, Inc. Proprietary Information
(Drawn actual size)
0.21" (5.5 mm)
23
Cut Line
Drill 3 Mounting Holes
Front Edge of Base