Maintenance And Troubleshooting; Maintaining Your Touch Display; Touch Sensor Care And Cleaning - 3M M1500SS Guide D'utilisation

3M™ MicroTouch™ Display M1500SS User Guide
CHAPTER 3

Maintenance and Troubleshooting

Maintaining Your Touch Display

To maintain your display and keep your display operating at peak performance:
 Keep your display and touch sensor clean.
 Adjust the display video controls. Refer to Chapter 3 for more information.
 Do not install the display in a place where ventilation may be hindered. Always
maintain adequate ventilation to protect the display from overheating and to ensure
reliable and continued operation.

Touch Sensor Care and Cleaning

3M Touch Systems recommends that you periodically clean the glass touch sensor
surface.
Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your touch sensor.
 Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.
 Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning
liquid onto the cloth, not the sensor, so that drips do not seep inside the display or
stain the bezel.
 Always handle the touch sensor with care. Do not pull on or stress cables.
3M Touch Systems, Inc. Proprietary Information
19