10.0 Technical Data
Max. Total height:
Max. Overall length:
Max. Turning radius:
Max safe slope:
Weight:
Weight without rear wheels:
Mass of the heaviest part:
Max. Width:
CAMBERS
0° camber
3° camber
6° camber
9° camber
Maximum load:
SIMBA up to a load of 65 kg
Seat heights:
The choice of frames, forks and castors, as well as the rear
wheel size (20", 22", 24") determines the seat heights which can
be achieved.
The wheelchair conforms to the following standards:
1. Requirements and test for static stability, impact resistance
and fatigue strength (ISO 7176-8).
2. Resistance to ignition (EN 1021-2).
Simba
1000 mm
850 mm
650 mm
10°
from 9 kg
from 6.9 kg
2.1 kg
20" REAR WHEEL
SW + 160 mm
SW + 200 mm
SW + 260 mm
SW + 310 mm
29
22" REAR WHEEL
SW + 160 mm
SW + 210 mm
SW + 270 mm
SW + 320 mm
11.0 Disposal / Recycling of Materials
If the wheelchair has been made available to you free of
charge, then it does not belong to you. If it is no longer
required, then follow the instructions to return it as given by
the organisation that made the wheelchair available to you.
In the following section, there is a description of the materials
used on the wheelchair, in view of the disposal or recycling of
the wheelchair and its packaging.
Particular regulations with regard to disposal or recycling
may be in force locally and these must be taken into account
when performing disposal. (This can include the cleaning or
decontamination of the wheelchair prior to disposal).
Aluminium: Castor forks, wheels, sideguards for the chassis,
armrest frame, footrest, push handles,
Steel: Fixing points, quick-release axle.
Plastic: Handles, tube stoppers, castors, footplates, armpads
and 12" wheel/tyre.
Packaging: Plastic bags made of soft polyethylene,
cardboard.
Upholstery: Woven polyester with PVC coatings and
expanded combustion modified foam.
Disposal or recycling should be done through a licensed agent
or authorised place of disposal. Alternatively your wheelchair
may be returned to your dealer for disposal.
24" REAR WHEEL
SW + 160 mm
SW + 220 mm
SW + 280 mm
SW + 330 mm
Rev.H