4
voltage selection switch
(may not be available on
certain computers)
5
padlock ring
6
cover release latch
Mini Tower, Desktop, and Small Form Factor Computers — Back-Panel Connectors
10
1
parallel connector
2
link integrity light
Your computer is equipped with a manual voltage-selection switch.
To help avoid damaging a computer with a manual voltage-selection switch, set
the switch for the voltage that most closely matches the AC power available in
your location.
Also, ensure that your monitor and attached devices are electrically rated to
operate with the AC power available in your location.
Insert a padlock to lock the computer cover.
Use this latch to open the computer cover.
1
9
Connect a parallel device, such as a printer, to the parallel connector. If you have a
USB printer, plug it into a USB connector.
NOTE:
The integrated parallel connector is automatically disabled if the computer
detects an installed card containing a parallel connector configured to the same
address. For more information, see "System Setup Options" in your online User's
Guide.
• Green — A good connection exists between a 10-Mbps network and the
computer.
• Orange — A good connection exists between a 100-Mbps network and the
computer.
• Yellow — A good connection exists between a 1-Gbps (or 1000-Mbps) network
and the computer.
• Off — The computer is not detecting a physical connection to the network.
2
3
4
8
Quick Reference Guide
5
6
7
15