Cleanmaxx XL-602-40 Mode D'emploi page 16

EN
Danger of Fire
Do not use the device if highly fl ammable gases are present in
■
the air.
Do not insert anything into the openings/nozzles of the device
■
and make sure that these do not become clogged.
Proper Connection
Only ever connect the device to a properly installed plug socket.
■
The plug socket must also be readily accessible after connec-
tion. The mains voltage must match the technical data for the
device (see the "Technical Data" chapter). Only use suitable ex-
tension cables whose technical data is the same as that of the
device.
Position the cable in such a way that it does not become
■
squashed or bent and does not come into contact with hot sur-
faces.
Proper Use
Use the device only in closed rooms. Do not operate it outdoors
■
or in rooms with high humidity or on hot surfaces.
If you use the device as a hand-held vacuum cleaner for clean-
■
ing a car, ensure that it is not exposed to rain or moisture.
The device should only be used when it is fully and correctly
■
assembled. The dust container and the fi lters must be inserted.
Always check the device for damage before putting it into oper-
■
ation. If the device, cable and/or mains plug shows visible signs
of damage, the device must not be used. You should also not
use the device if it has malfunctioned, been dropped or liquids
have been sucked up. In this case, have it inspected in a spe-
cialist workshop before you fi rst use it or contact the customer
service department to prevent any hazards. Do not try to repair
the device yourself or to replace any individual parts. Repairs to
electrical devices may only be carried out by qualifi ed experts.
Do not make any changes to the device.
■
09668_de-gb-fr-nl_V1.indb 16 09668_de-gb-fr-nl_V1.indb 16
16
08.09.2015 16:28:57 08.09.2015 16:28:57