The Dishwasher; The Controls - The Programmes - Use - Candy TRIO 503/1 Notice D'emploi Et D'installation

Technical data :
Place load EN50242
Capacity with pans & dishes
Water supply pressure (litres)
Power
Wash pump power
DISHWASHER CONTROLS
A Programme selection indicator lights
B Programme selection button
SELECTING THE PROGRAMMES AND SPECIAL FUNCTIONS
The dishwasher and the oven cannot be used simultaneously.
Setting a programme
Open the door and press the On/off button ; the 4 Program selection LEDs start flashing.
- Set the required programme by pressing Programme selection button, LED of the chosen
programme will turn on (2 LEDs for COLD RINSE programme).
- Close the door (after audible signal), the chosen programme will start automatically.
USE THE DISHWASHER
Opening the door
Grip the handle in the front panel and pull forward. If the machine comes open while it
is working, an electrical safety device automatically switches everything off. For the
machine to work properly, the door should not be opened while it is in operation.
Closing the door
Place the basket in the dishwasher. Make sure that the spray arm is free to rotate and is
not obstructed by cutlery, crockery or pans. Close the door, pressing on it to make sure
it is firmly shut.
Interrupting a programme
lt is not recommended that the door be opened while a programme is running, and especially
not during the main wash phase and final drying.
However, the appliance stops automatically when the door is opened.
When the door is closed again, the programme continues automatically.
40

THE DISHWASHER

6
4 persons
3
1900 W
150 W
A B
Drainage pump power
Max power absorbed
Water pressure
Fuse (amp)
C D
C Programme description
D On/off button
30 W
2050 W
mini 0,08 - max 0,8 MPa
10 A