Topcom BPM WRIST 2511 Mode D'emploi page 10

TOPCOM BPM WRIST 2511
11.2 Procedure
AM
PM
mon. d
mem.
AM
PM
mon. d
mem.
AM
PM
mon. d
mem.
AM
PM
mon. d
mem.
10
1. Press the POWER button. All digits will
light up, checking the display functions.
The checking procedure will complete
after about 2 seconds.
2. After all symbols appear, the display will
show "0" with the designated Memory
Zone.
3. After initialisation the monitor
automatically inflates the cuff to
approximately 180 mmHg. The
measurement will begin.
This monitor will re-inflate
automatically to
approximately 220mmHg if
the system detects that your
body needs more pressure to
measure your blood pressure.
4. When the measurement is completed,
systolic, diastolic and pulse will be
shown simultaneously on the LCD
screen.
When a mistake was detected during
measurement the Error mark appears on the
display