Axial Shock Spring Replacement - Blatchford EliteVT Instructions D'utilisation

9 Axial Shock Spring Replacement

Remove from foot shell as shown previously
1.
Remove rotation stop
3.
Withdraw
pylon
Re-lubricate bearing surface with 'Sapphire Endure' (928015) or equivalent PTFE loaded grease if
necessary.
Re-assembly is the reverse of above, note the position and location of anti-rotation pins in the
axial spring and the orientation of the slot in the pylon (posterior). Apply Loctite and apply
torque to screws as shown on page 4.
4
2.
Unscrew pyramid
screw to withdraw
pylon.
It may be necessary
to partially unscrew
the pyramid screw as
shown and tap the
screw head gently to
disengage the anti
rotation pins
4.
Using a long
reach hex
key wrench,
remove
distal spring
retaining
screw
Note spring rating
10
5
4
938289S/2-0120