Description; Technical Data - G-U B-2193 Série Instructions De Montage

Installation instructions
B-2193x | B-2393x
Motor-driven shoot-bolt lock for timber and steel doors
40
2.

Description

2.1

Technical data

General description
Lengths/Dimensions
Supply voltage
Inputs and outputs
Signalling
Environment
EN
y y Automatically-locking motor-driven shoot-bolt lock for
2-leaf timber and steel doors
y y External controller B-54900 suitable for mounting on
standard rail
y y Approved for fire and smoke protection doors
y y Approved in combination with corresponding door hardware
for emergency exit devices to EN 179 and panic exit devices to
EN 1125
y y Equipped as standard with latch and deadbolt monitoring
(B-2393x)
y y
Equipped as standard with latchbolt monitoring (B-2193x)
y y Backset: 65, 80, 100 mm
y y Clearance behind backset: 34 mm
y y
For other dimensions see Appendix 1
Operating voltage: 24 V DC ± 10%; residual ripple 100 mV pp;
y y
min. operating voltage of 22 V DC with emergency power
backup B-54903-23-3-9!
y y Operating current: 2–4.2 A max. (depending on operating
situation)
y y Standby: 100 mA max. (only with controller B-54900-01-2-8)
Inputs:
y y Control input I1 (release of active leaf)
y y Control input I2 (release of active and passive leaf)
Outputs:
y y Latch (deadbolt) monitoring
y y
Deadbolt monitoring (only with B-2393x)
y y Signal contact 1 ("Locked by motor" position reached)
y y Signal contact 2 ("Unlocked by motor" position reached)
y y Lever handle monitoring (optional, via follower monitoring
contact)
Loading capability of relay contacts: 24 V DC/0.5 A
y y Red 7-segment display and beeper in controller B-54900-01-2-8
y y Operating temperature: –20 °C up to +60 °C
y y Storage temperature: –25 °C up to +70 °C
y y Relative humidity: up to 95% at 40 °C
y y Corrosion protection: EN 1670 – grade 3
(high resistance = 96 hrs corrosion test)
y y
Protection type: IP30
y y Environment protection grade III according to EN 50131-1
(outside: covered or inside under extreme environmental
conditions)
06.2019 | 22288S | Designed in Germany