Leister MINIFLOOR Instructions D'utilisation page 18

Operating readiness
F. Insert the unwinding device (11) into
the hole (10) and fasten it in place with
the clamping screw (12).
G. Alternatively, without the unwinding de-
vice, guide the welding rod through the
lug (17).
H. Inspect the position of the adjusting
screw for the starting switch (20).
Meaning:
• Reduce start delay (−)
• Delay start (+)
Default setting ex works:
The middle groove of the setting washer
for the starting switch (20) is aligned
to the bottom edge of the guide arm (4).
I. Align the hot air hand tool (22), rapid
welding nozzle (24),, and guide wheel
(3) with the welding groove.
18
10
24
12
11
17
4
20
22 3