Leister MINIFLOOR Instructions D'utilisation page 13

Operating manual
Please read the Operating Instructions carefully before
use and keep them for future reference.
Leister MINIFLOOR
Drive unit
Application
Drive unit for welding fl oors with optional Leister hot air hand tool.
Warning
Caution
230
120
FI
(Translation of original operating manual)
Danger to life when opening the device as live components and connections are
then exposed. Pull the mains plug from the outlet before opening the device.
Danger of fire and explosion with improper use of the hot air hand tool (e.g., material
overheating), particularly in the vicinity of flammable materials and explosive gases.
Risk of burning! Do not touch exposed metal parts while hot. Allow the device to cool
down. Do not point the hot air flow at people or animals.
Connect the device to an outlet with a protective conductor. Any interruption of
the protective conductor inside or outside the device is dangerous!
Use extension cables with protective conductors only!
Risk of entanglement! Fingers, hair, or items of clothing can be drawn in.
The nominal voltage specified on the device must match the mains voltage.
If the network voltage fails, then the main switch and the drive must be switched
off.
An FI switch is urgently required for personnel protection when the device is
used at construction sites.
Device is not permitted to be operated unsupervised. Heat can reach flammable
materials that are not in view.
Device may be used only by trained specialists or under their supervision. Child-
ren are not permitted to operate the equipment under any circumstances.
Protect the device against humidity and dampness.
Minimum overhead clearance with TRIAC AT is 295 mm.
GB
13