Bosch B18 Série Instructions D'installation page 35

Adjust the furniture door using the threaded rod
̈
(Torx screwdriver). Re-examine the dimensions
of the crack continuously.
Close the door and check that the depth of the furniture
̈
front is aligned with the adjacent fronts.
If required, correct.
Tighten the bracket screws to fix the depth alignment.
̈
Close the door and check the side alignment. Correct
̈
by gently tapping the edge of the open furniture door
with your hand.
Tighten the nuts on the adjusting rail. This will fix the side
̈
alignment of the door.
Screw on the lower brackets (Installation kit).
̈
Predrill holes in the furniture door!
The lower bracket fixes the side position of the door.
1. Loosen the screw.
2. Check the side position of the door.
3. Screw in the wooden screw.
4. Tighten the screw.
5. Put the cover on the brackets.
Note:
The number of lower brackets depends on the width and the
design of the furniture door.
35