Attaching The Adjusting Rail To The Furniture Door - Bosch B18 Série Instructions D'installation

21. Attaching the adjusting rail to the
furniture door
NOTE
The adjusting rail is the most important means of adju-
sting the furniture front.
Unscrew the installation support part from the appliance
̈
door.
Store the positioning aids, there will be used in an
installation step later.
Measure the distance X between the adjusting rail and
̈
the overhead furniture/fixtures.
32
NOTE
Loosen the 2 nuts and remove the adjusting rail.
̈
Mark this amount X on the rear of the furniture door.
̈
Determine and mark the centerline of the furniture door.
̈
Put on the adjusting rail and align along the marks.
̈
Mark the drill holes.
Drill the holes.
̈
Screw on the adjusting rail tightly.
̈
Notes:
– Attach the adjusting rail to the furniture door with at least
6 screws. One screw should be inserted under each
double threaded bolt.
( * Wine unit)
– The adjusting rail features a variety of holes for the many
different design options of furniture doors. Always screw
into the best load-bearing material of the furniture door.