Crosscall ACTION-X5 Guide D'utilisation page 70

Dashcam mode
This mode allows you to just record the last 30 or 60 seconds of video you are interested
in. It is available for use with your standard angle and wide-angle rear camera.
09
30
Time-lapse mode
Time-lapse is a mode that lets you take videos at high speed, whether with your normal
or wide-angle camera. A favourite of sunset enthusiasts.
TIP: To achieve your time lapse in the best conditions, you might want to get your hands
on our CROSSCALL X-STICK accessory, an innovative tripod for your phone.
Night mode
This is the preferred mode for taking photos in places or at times of day with low light.
QR code reader
Your camera also acts as a QR Code reader. It identifies and deciphers the main types of
QR Code (website, business card, WiFi hotspot, sending SMS, calling).
Remember to check that this feature is enabled in the settings of your app.
To read a QR code, frame the QR code you want to scan in the centre of your camera and
click on the notification that appears at the bottom of your screen to perform the action
linked to the QR Code.
All you have to do is to select Dashcam mode,
start recording video, and when you press the
record button again, the last 30/60 seconds
will be recorded.
Anything that was filmed before the last 30/60
seconds and that precedes pressing the
record button will be automatically deleted.
After you press this button, Dashcam mode
will continue to operate. Any time you want to
save the last 30 or 60 seconds that have just
occurred, you will have to press the record
button.
To adjust the duration of the Dashcam, go
to Settings > Video >Dashcam duration and
select 30 or 60 seconds.
70