Table des Matières
Publicité
UsinG VoicE actiV atED DiallinG
NOTE: To use voice activated dialling, the voice activated dialling feature must be enabled on your device. See
your Bluetooth device manual for instructions. With the headset on, one long press on the call control button
activates the voice activated dialling feature on the headset.
MUl tiPlE UsEs oF a lonG PrEss on tHE call
control BUtton
HEADSET FUNCTION
Turn on power
Re-link to
Bluetooth device
Reject call
Transfer a call between
Headset and Bluetooth device
Voice activated dialling
statUs inDicators
HEADSET STATUS
Powering on
Power on
Powering off
Power off
Charging battery
Battery fully charged
Discovery state
Missed call
Ringing
On Line Indicator (OLI)
Low battery
STATE OF THE
Bluetooth DEVICE
Power off
Power on
Link dropped
Power on
Linked
Incoming call
Power on
Linked
On a call
Power on
Linked
No call
Blue light appears and flashes every 6 seconds
Blue light flashes every 6 seconds
Indicator flashes blue and red for 30 seconds
RESULT
Turns the power on
Re-links the device
Disconnects the call or sends the call to
voice mail depending on your device
Transfers the call from
one device to another
Activates the voice recognition feature
HEADSET STATUS INDICATOR
Red light appears and goes off
Indicator is not lit
Red light is on
Red light is off
Infrequent flashing blue/red
Press any button to cancel
Rapid flashing blue/red
Blue flash every 10 seconds
Flashes red
Publicité
Table des Matières
