Table des Matières
Publicité
BLUETOOTH PAIRING
EN BLUETOOTH PAIRING
Before using your headset for the first time, you
must pair it with another Bluetooth device, such
as a mobile phone. Make sure the headset is fully
charged.
Look in your Bluetooth device manual for the
section that describes how to set up a Bluetooth
wireless connection.
1.
Move through the menu selections on your
phone until the phone display shows "Look
for Devices, " or equivalent, as a selection.
2.
With your headset turned off, hold down the
call control button until the headset status
indicator briefly glows blue, then flashes red
and blue. The headset is now in discovery
mode and will stay that way for 30 seconds.
3.
On your phone, highlight and select "Look for
Devices", or equivalent, to activate the scan for
the headset.
4.
When the phone display shows the scan
results, select "6xx Plantronics". The phone will
continue to search for the headset.
5.
When the phone display asks for a passkey,
type "0000" and press Enter.
Your headset is now linked to your phone.
13
Publicité
Table des Matières
