Table des Matières
Publicité
English
Mounting distance for panelled wall - non-combustible material
Recommended min. convection area
above the stove:
800 cm² (may be distributed)
A
A
Recommended min. convection area below
the stove: 500 cm² (may be distributed)
Distance to combustible material
min. 200 mm (e.g. side wall)
It is recommended to knock out the 3 areas -
prepared for heat transfer
Distance to combustible material
min. 150 mm (e.g. door frame)
RAIS/attika - manual for R 500
To guide the hot air out of the gratings,
we recommends to install a non-flam-
mable plate just above the holes.
A-A
NB!!
Insulated shimney down to the
smoke connector (not included)
Distance to furniture
min. 900 mm
21
Publicité
Chapitres
Table des Matières
