Audio Pro R-10 Manuel D'utilisation page 15

OpeRaTiOns
RadiO One
R-10 & R-20BT
4. TO sET THE CLOCk
push the volume knob to open the menu. Turn the volume knob until ClOCk is displayed.
push the volume knob to enter hour adjust. Turn the volume knob until desired hour is set
(00-23). push again to enter minute adjust. Turn the volume knob until correct minutes are
displayed (00-59). push again to enter the new correct time setting.
push the source button the leave the menu mode.
Correct time is displayed in standby mode.
Clock will automatically be set correctly when a Rds station is tuned. (if the station sup-
ports CT function.)
5. TO PLaY an EXTErnaL aUdiO sOUrCE
Connect an external audio source (ipod, mp3 player, pC) with a 3,5 mm stereo plug to
line in and select line in as source.
6. TO PLaY WirELEss mUsiC FrOm a BLUETOOTH dEViCE (a2dP), OnLY r-20BT
select Bluetooth as source and wait for about 5 seconds.
when a beep sound is heard, push the >> button and await two short beeps. COde is
indicated in the display.
activate Bluetooth on the device to be used and search for Radio One. Refer to your
device manual. wait until "radioone" is detected by the device. enter the code "0000"
on the device to activate the connection to Radio One.
start playback on the device.
This function is only for devices equipped with Bluetooth a2dp audio transmission.
please nOTe:
a. To connect another bluetooth device, previous device must be disconnected.
not possible to play 2 bluetooth devices at the same time.
B. if cellphone recieves call during playback, playback will mute until call is ended.
7. TO adJUsT Bass and TrEBLE
push the volume knob to enter menu mode, turn to select Bass or TReBle. push to
change Bass or TReBle settings and turn the volume knob to adjust between
– 5 to +5 (0 is default setting).
press the source button twice to leave the menu mode.
8. TO adJUsT THE dimmEr
push the volume knob to enter menu mode, turn to select dimmeR. push and turn to
change the display light between hi – mi – lo (high is default setting). press the source
button twice to leave the menu mode.