Audio Pro R-10 Manuel D'utilisation page 12

OveRview
FrOnT
1. disPLaY window
displays Fm frequency, Rds station name, Clock, alarm On, selected source, muTe etc.
2. PrEsET button
push short to select a preset Fm station (mem Call). select preset station with << or >> buttons or
turn the volume knob to select the desired preset number.
long push to open preset memory (mem seT). select preset number with << or >> buttons or turn
the volume knob to the desired preset number. push preset memory button again to store station in
memory.
3. TUninG <<
push 1 sec to start auto search down the frequency scale.
For manual search push more than 2 sec and hold until desired frequency is found.
- Fine tune by short push (0.5 sec), changes frequency – 0.05 mhz
- select preset Fm stations in pReseT mode.
- Change snooze time in snOOZe mode.
4. sOUrCE selector.
push to select a source (R-10) Fm - line in.
push to select a source (R-20BT) Fm – line in – BT (Bluetooth) .
- in menu mode this button is used as one step back button or to leave menu mode.
5. TUninG >>
push 1 sec to start auto search up the frequency scale.
For manual search push for more than 2 sec and hold until desired frequency is found.
- Fine tune by short push (0.5 sec), changes frequency + 0.05 mhz
- select preset Fm stations in pReseT mode.
- Change snooze time in snOOZe mode
6. aLarm button
push to select alarm On, alarm OFF or cancel snooze function.
(The alarm time and other settings are made in the menu alaRm mode)
7. VOLUmE control – mEnU select
Turn clockwise to increase volume (max vOl 32).
Turn counter clockwise to decrease volume (min vOl 00)
push to enter menu mOde, turn to select menu.
in memory Call or memory seT mode, turn to select desired preset number.
8. On/sTandBY Touch sensor button
push gently to switch On or sTandBy.
in On mode the blue light will be lit around the volume knob.
9. sLEEP Touch sensor button
in On mode, push gently to select minutes to auto standby. (15-30-45-60-75-90-OFF).
sT (B on previous page) is indicated in the display window, and minutes left to auto standby
every 60 seconds.
10. mUTE Touch sensor button
push gently to activate or de-activate the muTe function.
during mute function, muTe is displayed in the display window.
RadiO One
R-10 & R-20BT