Carrera 18016012 Mode D'emploi page 29

How to assemble the shortbread biscuit attachment
1. Insert the screw conveyor
2. Place the base plate
edge faces outwards and the protruding part engages with the shortbread
biscuit attachment
3. Place the shortbread biscuit attachment
on and tighten the ring nut.
How to use the shortbread biscuit attachment
1. Loosen the locking screw and remove the cap (see fig.
2. With the shortbread biscuit attachment fixed, insert the meat grinder into
the accessories coupler and tighten the locking screw (see fig.
for the shaft to engage with the coupler, it may be necessary to turn the
meat grinder slightly.
3. Place the filling aid
4. Slide the shortbread biscuit shaper
ment .
15
5. Fill the filling aid with the dough and switch on the appliance. Start at speed
level 1.
6. Using the tamper
7. Cut the dough into the desired portions.
into the housing
4
onto the screw conveyor so that the lower, outer
9
. The groove must sit on the tappet.
15
3 4
14 onto the filler tube
2 , carefully push the dough down the filler tube.
.
3
onto the base plate then screw
15
9 15 16
3 .
16 into the shortbread biscuit attach­
6
).
A
). In order
B
EN 31