Carrera 18016012 Mode D'emploi page 27

How to assemble the kofta/kibbeh attachment
1. Insert the screw conveyor
2. Place the kofta/kibbeh attachment
groove sits on the tappet.
3. Place the cone
tighten the ring nut.
How to use the kofta/kibbeh attachment
1. Loosen the locking screw and remove the cap (see fig.
2. With the kofta/kibbeh attachment mounted, insert the meat grinder into the
accessories coupler then tighten the locking screw (see fig.
the shaft to engage with the coupler, it may be necessary to turn the meat
grinder slightly.
3. Place the filling aid
4. Fill the filling aid with the mixture and switch on the appliance. Start at
speed level 1.
5. Using the tamper
6. Cut the pressed mixture every 7.5 cm.
into the housing
4
onto the kofta/kibbeh attachment then screw on and
8
3
onto the filler tube
14
2 , carefully push the mixture down the filler tube.
3
onto the screw conveyor so that the
7
4 7 8
.
3
.
6
).
A
). In order for
B
EN 29