General Information; Warning And Safety Instructions; Important Technical Information; Guarantee And Liability Claims - Helios KWL EC 170 W Notice De Montage Et D'utilisation

Installation and Operating Instructions
Congratulations
You have chosen a product from Helios Ventilatoren. This means that you have purchased a premium product and you will benefit from our many years
of experience. All KWL EC 170 W / W ET units have been tested at every stage of production. Not only has the obvious function (e.g. the fans running) been
tested, but also the functions which you, as the customer, cannot test. For example, these include internal and external leakages and electrical safety. We
enable you to reduce operating costs through innovative ideas in the field of control and feedback control systems.
However, if you unexpectedly have a problem with our unit, you can contact the specialist installer or our Helios customer service team.
CHAPTER 1
GENERAL INSTALLATION
AND OPERATING
INSTRIUCTIONS
m
+
IMPORTANT
Compact wall-mounted units KWL EC 170 W / W ET
1 .0

General information

To ensure safety and correct operation please, read and observe the following instructions carefully before proceeding.
All relevant national standards, safety regulations and provisions (e.g. DIN EN VDE 0100) and the technical connection
conditions of the electrical supply company must be observed and applied.
The planning office provides the planning documents necessary for the system calculation. Additional information or a
detailed plan (chargeable service) can be requested from Helios. Keep the installation and operating instructions as a
reference at the device. After the final assembly, the document must be handed to the operator (tenant/owner).
Outline of the installation and operating instructions:
Chapter 1 – 3 General installation, operating instructions, unit installation and initial commissioning and adjustment
– intended for specialist installers
Chapter 4 – 5 Accessories + Service and Maintenance
– intended for specialist installers and end customers
All information on the operation and control of the compact unit can be found in the "easyControls" operating instruc-
tions (No. 82 200), which is included in the delivery. These operating instructions are intended for specialist installers
and end customers.
1 .1

Warning and safety instructions

The adjacent symbol is a safety-relevant prominent warning symbol . All safety regulations and/or symbols must
be absolutely adhered to, so that any dangerous situation is avoided .
1 .2

Important technical information

The unit is designed so that it is possible to change the filter without removing the doors on the front side. Therefore, this
action can be carried out by the user.
The unit may only be opened by an authorised electrician! The appropriate measures can be found in section 2.
1 .3

Guarantee and liability claims

In order to safeguard the guarantee and liability claims of the customer, the following information must be observed:
– Implementation according to "unit" Installation and operating instructions
– Implementation according to "easyControls" operating instructions
– The use of accessories, which are not approved, recommended or offered by Helios, is not permissible. Any damages
are excluded from the guarantee.
If these instructions are not observed, all warranty claims are excluded. This also applies to any liability claims extended
to the manufacturer.
1 .4 Regulations – Guidelines
If the compact KWL wall unit is installed correctly and used to its intended purpose, it conforms to all applicable regu-
lations and CE guidelines at its date of manufacture.
1 .5

Receipt

The delivery contains the unit type: KWL EC 170 W
or the unit type: KWL EC 170 W ET
Please check delivery immediately on receipt for accuracy and damage. If damaged, please notify the carrier immedia-
tely. In case of delayed notification, any possible claim may be void.
1 .6

Storage

When storing for a prolonged time, the following steps are to be taken to avoid damaging influences: Protection by dry,
air-dustproof packing (plastic bags with drying agent and moisture indicators). The storage place must be waterproof,
vibration-free and free of temperature variations. Damages due to improper transportation, storage or commissioning
are not liable for warranty.
1 .7

Shipping

The unit is packed ex works in such a way that it is protected against normal transport strain. Carry out the shipping
carefully. It is recommended to leave the unit in the original packaging until installation to avoid possible damages and
contamination.
1
EN