Publicité
Les langues disponibles
Les langues disponibles
English
(6) Lock the knob correctly.
Knob
Nail guide
NOTE: Be careful not to deform the collated wires and
not to disengage the nails with the guide surface.
Otherwise, the nail guide will not close correctly.
<NV50A1 • NV65AC>
(1) Press the magazine stopper and open the magazine
cover.
Magazine Cover
(2) <NV50A1>
Adjust the position of the nail holder according to the
nail length.
The nail will not feed smoothly if the nail holder is not
correctly adjusted.
1 Lift the nail holder.
2 Turn the nail holder to align the mark with the
numbers (1-1/4"(32 mm), 1-1/2"(38 mm), 1-3/4"(45
mm), 2"(50 mm) on the magazine cover.
16
Magazine cover
Magazine Stopper
For 1-1/4"(32 mm)
For 1-1/2"(38 mm)
For 1-3/4" and 2"
(45 mm and 50 mm)
Magazine Cover
Nail Holder
NOTE: Before loading nails in the magazine, adjust
the plate. If the magazine cover is forcibly
closed without adjusting the nail holder
correctly, the nail holder may be damaged.
(3) Place the nail coil into the magazine.
Insert the fi rst nail into the magazine opening.
First Nail
Nail
(4) Close the magazine cover.
(5) Grip the nail guide and knob with fi nger.
Press the knob down and swing the nail guide open.
Knob
Nail Guide
Mark
Magazine Opening
Magazine
Publicité
