Light Cancelling Mode; Screen Saver Mode; Cooler Temperature Settings - Brandt BFD561YNW Guide D'utilisation

Light Cancelling Mode

When would it be used?
• If you want to cancel lights of cooler, you can select this mode.
• Press on Freezer (F) and Cooler (R) buttons simultaneously, and open and close the
cooler door 3 times. The mode will be selected in this way. From now on, the lights
will not come on when freezer and cooler doors are opened.
• If you want to cancel this mode, repeat the same process or the mode will automatically
cancel itself after 24 hours.

Screen Saver Mode

• This mode can be selected for energy saving.
• Press D.COOL button for 3 seconds continously.
• After 3 seconds, the mode will be set and sound as beep beep.
• During screen saver mode, the lighting of display will be off.
• W hen we open door or press any button, the lighting of display will be on for 5
seconds, then it will be off again.
• Press D.COOL button for 3 seconds for cancelling this mode.

Cooler Temperature Settings

• Initial temperature value for the Cooler Indicator
is +4°C.
• Press cooler (R) button once.
• When you first push this button, +2°C appears
on the setting indicator of the cooler.
• W henever you press on this button, one bar
comes on cooler bar graphic indicator and lower
temperature will be set. (+8°C, +6°C, 5°C, +4°C,
+2°C)
• W hen you push the cooler button until +2°C
(maximum cold) appears on the cooler setting
indicator, and when you keep pushing, letters
SC (Super Cool) will flash.
• If you continue to press, it will restart from +8°C.
• The temperature value selected before Holiday
Mode, Super Freeze Mode, Super Cool Mode or
Economical Mode is activated will remain the
same when the mode is over or cancelled. The
appliance continues to operate with this
temperature value.
EN - 36 -