Freezer Temperature Settings; Warnings About Temperature Adjustments - Brandt BFD561YNW Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Freezer Temperature Settings

• Initial temperature value for Freezer Setting
Indicator is -18°C.
• Press freezer (F) button once.
• When you first push this button, -20°C appears
on the setting indicator of the freezer.
• W henever you press on this button, one bar
comes on Freezer Bar Graphic Indicator and
lower temperature will be set. ( -16°C, -18°C,
-20°C, -22°C, -24°C)
• W hen you push the freezer button until -24°C
(maximum cold) appears on the Freezer Setting
Indicator, and when you keep pushing, letters
SF (Super Freeze) will flash.
• If you continue to press, it will restart from -16°C.
• The temperature value selected before Holiday
Mode, Super Freeze Mode, Super Cool Mode or
Economical Mode is activated will remain the
same when the mode is over or cancelled. Your
appliance will continue operating in this
temperature value selected.

Warnings about Temperature Adjustments

• Your temperature adjustments will not be deleted when an energy breakdown occurs.
• It is not recommended that you operate your fridge in environments colder than 10°C
in terms of its efficiency.
• Temperature adjustments should be made according to the frequency of door openings
and the quantity of food kept inside the fridge.
• Do not pass to another adjustment before completing an adjustment.
• Your fridge should be operated up to 24 hours according to the ambient temperature
without interruption after being plugged in to be completely cooled. Do not open
doors of your fridge frequently and do not place much food inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor of your
fridge, when you take the plug off and then plug it on again to operate it or when an
energy breakdown occurs. Your fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient
temperature intervals stated in the standards,
according to the climate class stated in the
information label. W e do not recommend
operating your fridge out of stated temperatures
value limits in terms of cooling effectiveness.
Note: If the temperature of the environment is higher than 38°C, the freezer partition
temperature cannot be adjusted to -22°C and -24°C. It can only be adjusted to the values
of -16°C, -18°C, -20°C.
EN - 37 -
Climate Class
T
16 to 43 °C
ST
16 to 38 °C
N
16 to 32 °C
SN
10 to 32 °C
Ambient

Publicité

Chapitres

Table des Matières
loading

Table des Matières