Trekhaken
Bouten - Boulons - Bolts - Bolzen
Kwaliteit 8.8
M6 ≡ 10,8Nm of 1,1kgm
M12 ≡ 88,3Nm of 9,0kgm
Bouten - Boulons - Bolts - Bolzen
Kwaliteit 10.9
M6 ≡ 13,7Nm of 1,4kgm
M12 ≡ 122,6Nm of 12,5kgm
Attelages
Uitsnijding bumper: ≡ het gearceerde gebied moet weggesneden worden
Découpe pare-choc ≡ la zone hachurée doît être découpée
Excision bumper: ≡ the hatched area has to be cut away
Ausschnitzung Stoßstange: ≡ das schraffierte Gebiet muß weggeschnitten werden
M8 ≡ 25,5Nm of 2,60kgm
M14 ≡ 137Nm of 14,0kgm
M8 ≡ 35,3Nm of 3,6kgm
M14 ≡ 194Nm of 19,8kgm
Anhängevorrichtungen
"B" = de bumper
"O" = de onderrand van de bumper
"M" = het midden van de bumper
"B" = le pare-chocs
"O" = le bord inférieur du pare-chocs
"M" = le milieu du pare-chocs
"B" = the bumper
"O" = the lower rim of the bumper
"M" = the middle of the bumper
"B" = Stoßstange
"O" = Unterrand Stoßstange
"M" = der Mitter von Stoßstange
DIN 912 - DIN 931 - DIN 933 - DIN 7991
M10 ≡ 52,0Nm of 5,30kgm
M16 ≡ 211,0Nm of 21,5kgm
DIN 912 - DIN 931 - DIN 933 - DIN 7991
M10 ≡ 70,6Nm of 7,20kgm
M16 ≡ 299,2Nm of 30,5kgm
Tow bars