10.6
nailing tab installation
A.
Nailing tabs are provided as part of the frames, as shown. To
determine the final location and where to bend the nailing tabs you
must first determine the thickness of your finishing material (i.e.
drywall). This will determine the dimension from the front edge of the
corner post to the nailing tab. Once the nailing tab is in the desired
location and secure using an appropriate fastener*.
* Additional fasteners may be installed.
NAILING
TABS
fi nishing
1/2" FINISHING
MATERIAL
3/4" FINISHING
MATERIAL
W415-1613 / F / 03.12.19
EN
51