Installation - Wamsler PRIMO 108 7105 Mode D'emploi

1.2 Installation

The device comes with door knob dismantled. Be mapped before putting
into the handle as in Figure 4 mounted.
Fuels
The equipment can be used with fuels detailed in the followings. This way the
"low-smoke" and trouble-free operation can be secured. Use only dry wood
with a moisture of maximum 20%.
Hard wood
Soft wood
Wood briquette after DIN 51731
Filling quantities
- Split billet: max. length: 33 cm
2 billets per filling, max. 1.7 kg
- Wooden briquette: max. 1.3 kg
Adjustment of the burning air:
Wood
Wood
Wood
IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with
preventive chemicals, furthermore paper and cardboard. For kindling please
use wood scrapings or grill starter but never use liquid auxiliaries!
The first kindling
•
At the first fire set-up could be a little smoke, but is not dangerous, normal!
In this time, please ventilate the room carefully!
Warning! Upon the first kindling, smoke and unpleasant smell may be
generated. Always ensure the proper ventilation of the room (by opening
windows and doors), and heat the fireplace at maximum rated heating
performance. If with the first heating the maximum temperature is not
reached, the above-mentioned effects may as well arise later on.
Types of fuels
Fuel
Nominal heating performance
Warming up, kindling
Putting out of working
order
Table 1
Heating value appr.
kWh/kg
4,0 – 4,2
4,3 – 4,5
5,0 – 5,2
Setting of the primary
23
air regulator
H
A
Z