OBJ_BUCH-2583-003.book Page 22 Thursday, September 1, 2016 7:50 AM
22 | English
Symbols and their meaning
Danger area! Keep hands, fingers or
arms away from this area.
30mm
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
When sawing mitre/bevel angles, the ad-
justable fence must be pulled outward.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts. In this, mitre angles
from –47° to +52° as well as bevel angles from 0° to 45° are
possible.
The capacity of the power tool is designed for sawing hard-
wood, softwood, particle and fibreboard, as well as alumini-
um and plastic.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Blade guard
2 Lever for releasing the tool arm
3 Handle
4 On/Off switch
5 Retracting blade guard
6 Fence
7 Saw table
8 Mounting holes for material clamp
9 Insert plate
10 Locking knob for various mitre angles
11 Mitre detent lever
12 Mitre angle indicator
1 609 92A 3A2 | (1.9.16)
13 Scale for mitre angle
14 Mounting holes
15 Recessed handles
16 Drill holes for extension bars
17 Adjustable fence
18 Material clamp
19 Dust bag
20 Chip deflector
21 Wing bolt for fixing the adjustable fence
22 Hex key (size 6 mm)/cross-head screwdriver
23 Stop screw for 45° bevel angle
24 Tilt-protector bar
25 Chip ejector
26 Bevel lock lever
27 Transport safety-lock
28 Transport handle
29 Spindle lock
30 Adjusting screw of depth stop
31 Indicator for bevel angle
32 Scale for bevel angle
33 Stop screw for 0° bevel angle
34 Holes for tilt-protector bar
35 "Tilt-protector bar" fastening set
36 Extension bar
37 Fastening screw for extension bar
38 Cross-head screw
(attachment of retracting blade guard)
39 Hex socket screw for mounting of saw blade
40 Clamping flange
41 Saw blade
42 Interior clamping flange
43 Wing bolt for adjusting the height of the threaded rod
44 Threaded rod
45 Detents for standard mitre angles
46 Screws for insert plate
47 Hex socket screws (6 mm) of the fence
48 Screw for bevel angle indicator
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Noise Information
Sound emission values determined according to
EN 61029-2-9.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); Sound power level
105 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Bosch Power Tools