Manitowoc iAuCS Manuel D'installation, D'utilisation Et D'entretien page 9

Section 2
3. Locate and remove either the membrane material or
the plug from the ice machine.
4. Apply food grade silicone and install Y connector
through the hole in the ice machine base. Connect
the clear vinyl tubing to one side of the Y branch, the
other side is for the plug removed in step 3 or the
plug provided with the AuCS.
Insert Y
connector
with tubing
Top View
Install plug
provided with
AuCS
or
plug removed
in Step 3
Y-Connector
Part Number 000009036 8/13
5. Determine the amount of tubing required in the
6. Slide the tubing on the AuCS® pump.
Route tubing
to this area
Connect
tubing
Into Base of
Ice Machine
Installation Instructions
AuCS control box and cut off the excess tubing.
Slide the tubing
on the iAuCS®
pump.
9