Milwaukee AS-30 LAC Notice Originale page 20

TECHNICAL DATA
Production code............................................................................
...................................................................................................
Volts ..............................................................................................
Mains frequency ...........................................................................
Fuse..............................................................................................
Safety class .................................................................................
Type of protection .........................................................................
Total connected load.....................................................................
Power ........................................................................................
IEC
Rate of air fl ow..............................................................................
Vacuum .........................................................................................
Sound pressure level L IEC 60335-2-69 .....................................
p
Uncertainty K= ..............................................................................
Vibration emission value a
hv
Tank volume .................................................................................
Maximum power off -take ..............................................................
Suction hose diameter ..................................................................
Weight according EPTA-Procedure 01/2003 ................................
Power supply cord ........................................................................
OPERATING ELEMENTS
1. Appliance socket
2. Latch
3. Inlet fi tting
4. Container
5. Castor
6. Hose hook
7. Handle
8. Accessory positions
9. Speed control
10. Switch
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Instructions for use
The appliance must:
• only be used by persons, who have been instructed in its
correct usage and explicitly commissioned with the task of
operating it
• only be operated under supervision
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge.
• Children shall be supervised to make sure that they do not
play with the appliance.
• Do not use any unsafe work techniques.
• Never use the appliance without a fi lter.
• Switch off the appliance and disconnect the mains plug in
the following situations:
- Prior to cleaning and servicing
- Prior to replacing components
- Prior to changing over the appliance
- If foam develops or liquid emerges
Besides the operating instructions and the binding accident
prevention regulations valid in the country of use, observe
recognised regulations for safety and proper use.
Before starting work, the operating staff must be informed
on and trained within:
• use of the machine
• risks associated with the material to be picked up
• safe disposal of the picked up material
20 ENGLISH
414 879 - AS-30LAC.indd 20 414 879 - AS-30LAC.indd 20
DUST EXTRACTION
IEC 60335-2-69 ...............................
..4587 85 01... .......................................4588 50 01...
..000001-999999 .................................. 000001-999999
..220-240 V ..................... ...........220-240 V
......50/60 Hz ................... ...............50/60 Hz
...........16 A
..............I ........................ .......................I
...... IP X4 ........................ ............... IP X4
.......2400 W .................... ................2300 W
.......1200 W .................... ................1200 W
.........270 m /h ................ ................4500 l/min
3
.........250 hPa ................. ..................250 mbar
...........67 dB(A) .............. ....................67 dB(A)
.............2 dB(A) .............. ......................2 dB(A)
.......< 2,5 m/s ................. ................< 2,5 m/s
2
...........30 l ....................... ....................30 l
.......2400 W .................... ................ 1100 W
........ø 36 mm.................. .................ø 36 mm
........14,5 kg .................... .................14,5 kg
.. H07RN-F3G1,5 ................................ H05RR-F3G1,5
Purpose and intended use
This mobile dust extractor is designed, developed and
rigorously tested to function effi ciently and safely when
properly maintained and used in accordance with the
following instructions.
This machine is intended for commercial use, for example in
hotels, schools, hospitals, factories, shops, offi ces and
rental businesses.
This machine is also suitable for industrial use, such as e.g.
plants, construction sites and workshops.
Accidents due to misuse can only be prevented by those
using the machine.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
The appliance is suitable for picking up dry, non-fl ammable
dust and liquids.
Any other use is considered as improper use. The
manufacturer accepts no liability for any damage resulting
from such use. The risk for such use is borne solely by the
user. Proper use also includes proper operation, servicing
and repairs as specifi ed by the manufacturer.
For Dust Class L machines (with type designation -0L, -2L)
following applies:
The appliance is suitable for picking up dry, non-fl ammable
dust and liquids, hazardous dusts with
OEL value > 1mg/m3.
1)
Dust Class L (IEC 60335-2-69).
The dusts which belong to this class have OEL
1mg/m3.
For machines intended for the Dust Class L, the fi lter
material is tested. The maximum degree of permeability is
1% and there is no special requirement for disposal.
For dust extractors, ensure adequate air change rate L,
when the exhaust air is returned to the room. Observe
national regulations before use.
Electrical connection
• It is recommended that the machine should be connected
via a residual current circuit breaker.
• Arrange the electrical parts (sockets, plugs and couplings)
and lay down the extension lead so that the protection
class is maintained.
• Connectors and couplings of power supply cords and
extension leads must be watertight.
2
values >
1)
27.07.2017 11:15:22 27.07.2017 11:15:22