Seca 786 Mode D'emploi page 10

Fitting the column
On the 786 cultura, the column is already fitted and weighing can commence immediate-
ly. On the other models, please proceed as follows:
– turn the column so that the display fa-
ces the weighing surface.
– pass the connecting rod through the
opening and place the column in the
opening.
– Screw the column to the weighing plat-
form from underneath.
Your scale is mobile...
It has two castors at the rear.
– For mobile use, the seca 786 / culta/
cultura scale can be tipped back-
wards a little way and then moved on
the castors.
10
– If necessary, lay the scale carefully on
its side to tighten up the screws.
– Hook the connecting rod over the load
lever tongue.
– Then place the scale upright again.
load lever-
tongue
connecting rod