Insert Locking Hose; Hose Assembly - RIDGID DV05000 Mode D'emploi

SP6957-2 ASH RIDGID_SP6957 5/13/16 11:58 AM Page 8
Vac Assembly (continued)

Insert Locking Hose

NOTE: Use ONLY the metal lined hose
and metal accessories provided with this
Ash Vac.
1. Align hose tabs with inlet and insert
the locking end of the hose into the
inlet of the Vac drum, as shown.
2. Rotate the hose clockwise to lock into
place.
3. To remove the hose from the Vac,
rotate the locking hose counter-
clockwise and pull the hose out of the
Vac inlet.

Hose Assembly

1. Slide the round end of the extension
nozzle into the smaller tapered end of
the wand nozzle.
2. Attach wand nozzle to hose end.
Hose
Locking
End
Locking Hose
(Metal Lined)
Wand
Nozzle
8
Inlet
ROTATE HOSE
CLOCKWISE
TO LOCK
Extension
Nozzle