Dimensions; Manual Operation; Changing Side - Erreka KUBAR Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

INSTALLATION
4

DIMENSIONS

KUBAR 3 - KUBAR 6 - KUBAR 4 PACM
5

MANUAL OPERATION

6

CHANGING SIDE

34
Installation Guide
KUBAR 8
Dimensions in mm
If necessary the barrier can be operated manually:
1 Turn the key (1) and open the cover (2).
2 Insert the crank (3) in the operator shaft (4) and turn
in the required direction.
3 When finished, return the crank to the support (5).
4 Close the cover and turn the key.
Motorised operation is not possible when the cover
(2) is open, since the safety switch (6) prevents it.
Proceed as follows to change the arm side:
1 Remove the cap (1).
2 Dismount the support (2) and mount it on the other
side.
O
Tighten the screw (3) with a torque of 20 Kg-m.
3 Place the cap (1) on the free orifice.

Publicité

Table des Matières
loading

Table des Matières