Publicité
EN
Electrical connection / Surface Mount
RED
To +VDC (fuse @ 3A)
BLACK
To Chassis Ground
YELLOW
For Synchronization:
Connect YELLOW wires of all heads to-
25
gether for synchronization (all heads must
be set at the same pattem)
For Simultaneous or Alternating Flash:
1. Apply +VDC to RED and YELLOW wires
simultaneously to enter Grouping mode;
lighthead will display short (single or
double) flashes:
• Single flash = Group 1
• Double flash = Group 2
2. Remove YELLOW wire from +VDC and
momentarily apply to +VDC to change
Groups:
• Heads in the same Group flashtogether.
• Group1 Heads alternate with Group2
Heads.
For Flash Patterns:
Momentarily apply +VDC to
YELLOW wire:
• once for next pattern
• quickly three times for pattern 0
FP-Nr.
Blinkmuster:
1
Single *
2
Double *
3
Triple *
4
Quadruple
5
Steady
* Only the flash patterns 1 ,2 and 3
are approved for use in Europe.
Publicité
