Cleaning And Descaling; Descaling - Boneco U300 Mode D'emploi

Masquer les pouces Voir aussi pour U300:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
CLE ANING AND DESCALING

DESCALING

If stubborn limescale deposits form at the bottom of the
BONECO U300, the appliance must also be descaled in
addition to the cleaning. For this process, use the pro-
vided "CalcOff" descaling agent. You can get replace-
ment parts at your BONECO specialist dealer or at the
online store under www.shop.boneco.com.
1.
Disconnect the BONECO U300 from the power outlet.
The unit must always be unplugged from the power
outlet before draining it. Failure to do so can result in
electric shock and pose the risk of severe or fatal
injury!
2. Empty the water tank.
Tip the long side of the BONECO U300 towards the
sink (with the viewing window facing down). This
prevents water from getting into the air outlet and
damaging the unit.
3. Remove the A250 and the A7017 Ionic Silver Stick
4. Mix 1 bag of CalcOff with 1 liter of water and pour
the mixture into the water tank, one half to the left
and right each.
5. Wait 30 minutes to allow the solution to take effect.
6. Clean the BONECO U300 with a dish brush.
7.
Rinse the inside of the water tank with fresh tap
.
water.
®
8. Reinsert the A7017 Ionic Silver Stick
23
en
®
and the A250.

Publicité

Table des Matières
loading

Table des Matières