SEVERIN TO 9488 Mode D'emploi page 12

power. There is a severe danger of burns
in any case of contact.
∙ Always let the pizza stone cool down
completely before it is removed from the
appliance.
∙ Caution: do not place aluminium foil or
anything similar between the grill rack and
the pizza stone. Place the stone directly
onto the rack.
∙ Do not allow the power cord to touch any
hot parts of the appliance.
∙ Do not let the power cord hang free.
∙ Always switch off and remove the plug
from the wall socket
- after use, as well as
- in cases of malfunction, and
- during cleaning.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This appliance is intended for domestic or
similar applications, such as
- in shops, offi ces and other similar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
Temperature control
With the temperature control knob, the
temperature can be set to the desired level.
The indicator lamp lights up after the timer is
activated. Once the pre-set temperature has
been reached, the indicator lamp switches
off.
12
5-position switch settings
Both heating elements and rotating spit

switched off.
Upper heat
Upper heat with rotating spit
Upper heat and lower heat
Lower heat
The heating elements will only be switched
on after the timer is activated.
Timer
By using the timer, the cooking time can be
selected up to a maximum of 60 minutes.
After the pre-programmed time has elapsed,
an acoustic signal indicates that the heating
elements are switched off. To switch off the
whole appliance, the heating elements must
be switched off as well.
Hot-air convection
The hot-air convection fan is activated
automatically whenever the heating
elements are switched on.
Rotating spit
When using the rotating spit, only the upper
heating function is used.
∙ Before the spit is used, always ensure
that the backing rack and baking tray are
properly inserted into one of the guide
rails.
∙ When the food to be cooked is put onto
the spit, make sure that it cannot come
into contact with either the upper heating
elements or the baking tray - ensure
suffi cient distance.
∙ Pierce the food to be cooked on the spit,
making sure that the spit goes through
the middle. This is to ensure that the
food is suffi ciently distant from the baking
tray, the oven interior and the heating