Troubleshooting - Renkforce SAP-702 Notice D'emploi

Troubleshooting

In purchasing the miniature amplifier, you have acquired a product which uses state-of-the-art technology and is
operationally reliable. Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible errors here:
Please observe the safety instructions.
No sound is audible:
• A device in the playback chain is not turned on.
• The wrong input was selected on the miniature amplifier.
• The VOLUME control (1) is set to the left stop.
One channel does not work:
• An RCA cable was disconnected from the source device (e.g. the cassette recorder) or the RCA inputs (11-13).
• The balance control BALANCE (5) is turned on the miniature amplifier.
• A loudspeaker cable was disconnected from the loudspeaker clamp.
The sound is distorted:
• The miniature amplifier input receives an excessive signal.
• The volume is set too high and the loudspeakers distort.
• The controls BASS (6) or TREBLE (7) are set too high.
No bass is audible:
• One loudspeaker is connected the wrong way.
• The BASS control (6) on the miniature amplifier is set to minimum.
Playback is without treble:
• The TREBLE control (7) on the miniature amplifier is set to minimum.
Repairs other than those described above should only be carried out by an authorised
specialist.
32
Operating Instructions

English