Set-Up - Renkforce SAP-702 Notice D'emploi

Set-Up

When selecting the installation site, consider the room conditions, meaning the location of the next outlet, etc. Also
prevent direct sunlight, vibrations, dust, heat, cold and dampness. Keep the device away from strong transformers
or motors.
Place the miniature amplifier on a stable, horizontal surface. There must be enough space
around the device for air circulation to permit dissipation of the generated heat. Therefore, only
place the miniature amplifier on a level surface and not on carpets, etc. Do not cover up the
ventilation slots in the casing.
If you do not heed these instructions, the device may be damaged.
Do not drill extra holes or screw any extra screws for mounting purposes into the case. This will
damage the device.

Because of the variety of used lacquers and polishes for furniture, the device base might leave residues
on furniture due to a chemical reaction. Therefore, the device should not be placed on valuable furniture
surfaces without suitable protection.
23