Cleaning; Disposal; Troubleshooting - Renkforce E-SA 9 Notice D'emploi

Cleaning

The outside of the device should only be cleaned with a soft dry cloth or a soft brush. Never use aggressive cleansing
agents or solvents since these may damage the surface of the housing or impair its operation.

Disposal


Please dispose of the inoperative device according to the current regulations.

Troubleshooting

In purchasing the miniature amplifier, you have acquired a product which uses the most up-to-date technology
available and is operationally reliable. Nevertheless, problems or faults may occur.
Therefore, we would like to describe here how to eliminate possible faults:
Always observe the safety instructions!
No sound is audible:
• A device in the playback chain is not turned on.
• The wrong input was selected on the amplifier.
• The volume control (5) is set to minimum.
• Fuse defective.
One channel does not function:
• A cinch cable was disconnected from the source device (e.g. the cassette recorder) or the amplifier input (9-11).
• The balance control (4) was set wrongly on the amplifier.
• A loudspeaker cable was disconnected from the loudspeaker clamp.
35