Intended Use; Explanation Of Symbols - Renkforce SAP-702 Notice D'emploi

Intended Use

The miniature amplifier is intended for use in private music systems.
The device serves to amplify low-level audio signals.
This is achieved by connecting the miniature amplifier between the signal source to be amplified and the
loudspeakers.
This product is only approved for connection to 230V~/50Hz alternate current. It is intended for indoor use only. Do
not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided.
Any use other than that described above will damage this product and involves the risk of short circuits, fire, electric
shock, etc.
The product must not be modified or converted, and the casing must not be opened.
The safety instructions must be observed at all times.
Observe all safety instructions in these operating instructions!

Explanation of Symbols

The lightning symbol in a triangle warns you against unprotected live components or elements inside
the housing or "live" connection points. Touching these components or connections can lead to fatal
injuries.
Lines may only be installed at these connections by a specialist, or ready-for-connection lines must be
used.
The device contains no parts that require servicing by the user. Therefore, never open the device.
The exclamation mark symbol on the device indicates that the user should read these operating
instructions prior to using the product.

The "Hand" symbol indicates special advice and operating information.
20
Operating Instructions

English