Roland CUBE 20GX Mode D'emploi page 10

Panel Descriptions
17
FOOT SW
TIP: JC CLEAN/LEAD RING: SOLO jack
If a footswitch (BOSS FS-5U or FS-6; sold separately) is connected
here, you'll be able to use your foot to switch channels.
* This unit is equipped with a TRS type
jack that is wired as follows.
Cable:
Stereo 1/4" phone type
Stereo 1/4" phone type
FS-6
RING TIP
SOLO JC CLEAN/
LEAD
B
Switch Explanation
Switches you between the JC CLEAN channel and the
LEAD channel.
JC CLEAN/LEAD
(TIP)
If the SOLO channel is selected, switches you to the JC
CLEAN channel.
SOLO (RING)
Switches you to the SOLO channel.
8
TIP
RING
SLEEVE (GND)
Cable:
Stereo 1/4" phone type
1/4" phone type x 2
or
FS-5U
RING TIP
SOLO JC CLEAN/
LEAD
A
JC CLEAN/LEAD (TIP)
• If JC CLEAN is selected, pressing the [JC CLEAN/LEAD] (TIP)
switch will switch you to LEAD.
• If LEAD is selected, pressing the [JC CLEAN/LEAD] (TIP) switch
will switch you to JC CLEAN.
2: HOT 1: GND 1: GND
3: COLD
SOLO
• If SOLO is selected, pressing the [JC CLEAN/LEAD] (TIP) switch
will switch you to JC CLEAN.
SOLO
MEMO
If you want to switch to LEAD, press the [JC CLEAN/LEAD] (TIP)
switch once again.
SOLO (RING)
• If JC CLEAN or LEAD is selected, pressing the [SOLO] (RING)
switch will switch you to SOLO.
2: HOT
3: COLD
JC CLEAN/
LEAD
JC CLEAN/
LEAD
SOLO
JC CLEAN/
LEAD