Introduction - Ramiaudio CDM510 Manuel Utilisateur

The CDM510 allows you to select one of five digital audio sources.
A monitoring section allows the user to control the inputs/outputs of the CDM510 at any time. A 24-bit 96KHz D/A
converter provides a balanced analog output on a Sub-D 9 on the rear panel, a headphone output for efficient signal
control.
Digital inputs / outputs in AES/EBU format on transformer.
,
Management of audio signals sampled up to 96KHz.
,
It accepts all professional and semi-professional digital audio formats (AES/EBU, SPDIF, IEC 958) as input.
,
Digital peakmeter for level visualization.
,
No alteration of associated data (index, text...).
,
Selection of the source and visualization of the audio presence via an embedded web server.
,
Bypass between the main source and the outputs in the event of a power failure.
,
2 independent digital outputs (even in the event of a power failure).
,
Monitoring: bargraph, headphone output (integrated 24-bit / 96KHz D/A converter).
,
Balanced stereo analog stereo monitoring output on Sub-D9.
,
Balanced stereo analog stereo input on Sub-D9, assignable to one of the selector inputs
,
Resynchronization of the output of each input on a single Master clock.
,
No desynchronization of the output during source switching.
,
APPLICATION
Switching several studios on air.
,
Selection of different digital audio sources to an output.
,
Selection of different digital audio sources on a return control.
,
Selection of the digital audio source headphone return on a speak studio common to several control rooms.
,
The CDM510 can ensure the continuity of the local transmission, in case of maintenance on the control room
,
equipment, by allowing fast switching to satellite reception or to a backup source. The control room is thus completely
isolated by simple manual or automatic switching.
RAMI

INTRODUCTION

24
CDM510