Monacor CD-122 Mode D'emploi page 9

4 Deactivating the Automatic
Start Function
The CD player is provided with an automatic
start function: After switching on the unit and
reading in a sound carrier (CD, USB flash drive or
memory card) the replay of the first title will start
automatically . If you do not wish the unit to start
automatically [replay will not start before the
button PLAY/ PAUSE (10) is pressed], deactivate
the automatic start function .
WARNING To make this modification, the
unit must be opened by skilled
personnel only . Inexpert handling
may result in electric shock!
Always disconnect the mains plug from the
socket before opening the unit!
On the PCB with the power supply unit and the
audio output jacks there is a jumper (see arrow
in fig . 5) . The automatic start function is acti­
vated when the jumper is in the position AUTO
PLAY . To deactivate the function, re arrange the
jumper to the position MANUAL PLAY .
5 Setting Up and Connecting
the Player
The player is designed for installation into a rack
(482 mm / 19"); however, it can also be placed as
desired as a desktop unit . For rack installation,
1 rack space (RS = 44 .45 mm) is required .
Prior to making or changing any connections,
switch off the CD­122 and the units to be con­
nected .
1) Connect the outputs of the two player
mechanisms CD PLAYER 1 OUT (21) and CD
PLAYER 2 OUT (20) [L = left channel, R = right
channel] via cables with RCA connectors to
the CD player inputs, e . g . on a mixer or
amplifier .
2) Connect the mains cable provided to the
mains jack (22) first and then to a mains
socket (230 V/ 50 Hz) .
6 Operation
Switch on the player with the POWER switch (1) .
The displays (14) will show Welcome
First the player will read the CD . If no CD has
been inserted, the player will read the USB flash
drive . If no USB flash drive has been connected,
the player will read the SD / MMC memory card .
If no memory card has been inserted, the display
will show NO DISC .
Oper ation of both player mechanisms is
identical . If only one player mechanism is re­
quired, switch off the other player mech a nism
with its button POWER (15) .
6.1 Remote control
1) To insert the batteries (2 × 1,5 V, size AAA),
remove the battery compartment cover on
the rear side of the remote control . Insert the
batteries as indicated in the battery compart­
ment . Close the compartment with the cover .
If the remote control is not in use for a
longer period of time, remove the batteries to
prevent any damage due to battery leakage .
2) When you press a button on the remote con­
trol, always direct the remote control towards
the sensor IR (4) . There must be no obstacles
between the remote control and the sensor .
3) First select the player mechanism to be con­
trolled by the remote control with the button
CD 1 / CD 2 (28) . The green LED CD 1 or CD 2
(12) will light up on the player mechanism
selected .
4) If the range of the remote control decreases,
the batteries are exhausted and must be re­
placed .
Used batteries must not be placed
in the household waste; always take
them to a special waste disposal, e . g .
collection container at your retailer .
6.2 Replaying music titles
1) Insert a CD with the lettering facing up into
the slot (6) until it is pulled in automatically
and / or
cconnect a USB flash drive to the USB port
(5) or connect a hard disk (with individual
power supply, if required) to the USB port
and / or
insert a memory card into the slot SD / MMC
CARD (13), the notched corner of the card
facing up . To remove the card, slightly push
it in to eject the card from the slot .
2) Select the sound carrier (CD, USB flash drive,
memory card) with the button FUNC (19), if
necessary .
3) After reading in the sound carrier, the first
title will start automatically . However, if the
automatic start function has been deactivated
(chapter 4), press the button PLAY/ PAUSE
(10) to start the first title . To select other titles
see chapter 6 .3 .
4) While replaying, the upper line of the display
will show the replay symbol  on the right .
The lower line will show the number (TR ...)
of the current title and the time already
played of the title (min . : sec .) . At the far
right, MP3 is shown for titles in
or for standard audio CDs .
CDA
5) For MP3 files, the following additional infor­
mation will scroll in the upper line:
File – ...
Title – ...
Artist – ...
Album – ...
.
Note: If an information is not available, the display
will show
Unknown
To activate / deactivate this information scroll­
ing through the line, press the button ID3
(27) .
6) When you press the button DISPLAY (26) on
the remote control, various information for
MP3 files will be displayed in the lower line
of the display:
basic setting
The lower line will show the title number and
the time already played of the title .
first actuation of button
The file name will be displayed .
second actuation of button
The number of folders and the number
of titles will be displayed .
third actuation of button
return to basic setting
7) Press the button PLAY/ PAUSE to switch be­
tween replay and pause . In the pause mode,
the pause symbolwill be inserted and the
time indication will flash .
8) To stop the replay, press the button STOP (9) .
9) To eject the CD, press the button EJECT (11) .
6.3 Title selection
6.3.1 Direct selection of the title number
For direct selection of a title, enter its number
with the numerical keys (24) on the remote
control . To start the title, press the button
PLAY/ PAUSE (10) .
Examples:
Title number Keys
135
Note: The player will arrange MP3 titles as follows:
1 . all titles without folder in the ROOT directory
2 . all titles in folders in the ROOT directory
3 . all titles in subfolders, etc .
The titles and folders will not be arranged in alpha­
betical order, but can be easily found with the search
function (
6.3.2 Skipping titles
To skip one title or several titles in forward or
reverse direction, briefly press the button CUE
or REV (8) [repeatedly] .
Button CUE: to skip to the next title
Button REV: to return to the beginning of the
title currently playing . Each time the button REV
is pressed again, the unit will go back one title
at a time .
Note: Only press the buttons REV and CUE briefly,
longer actuation will result in fast forward or reverse .
MP3 format
6.3.3 Alphabetical search for MP3 titles
1) Press the button FIND (17) . A magnifying
2) Press the button CUE [forward direction] or
instead of a name .
3) If there are several file names beginning with
4) When searching, the display will always show
The display will show EJECT
be ejected and can be removed . If the CD is
not removed from the slot, the CD player will
pull it in again automatically after approx .
10 seconds .
4 4, PLAY/ PAUSE
27 2, 7, PLAY/ PAUSE
1, 3, 5, PLAY/ PAUSE
☞ chapters 6 .3 .3 and 6 .3 .4) .
in forward / reverse direction
glass symbol will flash on the left at the
bottom of the display . On the right of it,
the letter A will appear and in the upper
line of the display the name of the first file
beginning with the letter A .
REV (8) [reverse direction] to select the first
letter of the desired file name . The numerals
0 – 9 are also available . If there are no file
names beginning with certain letters or num­
bers, these letters or numbers are marked
None .
the same letter, select the desired letter and
keep the button REV or CUE pressed until
the letter starts flashing next to the magni­
fying glass symbol . All file names beginning
with the letter will now be available to be
selected one after the other with the button
REV or CUE .
the number of the folder and of the title on
the right at the bottom . When you have
found the desired title, start the replay with
the button PLAY/ PAUSE (10) .
, the CD will
9