LaserLiner SuperPlane-Laser 3D Mode D'emploi page 7

Special product features
Automatic alignment of the device with a magnetically dampened pendulum system.
The device is brought into initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum lock during transport.
Devices with PowerBright technology have special high-performance diodes to produce
super bright laser lines. These remain visible over longer distances, in bright ambient light
and on dark surfaces.
Number and direction of the lasers
H = horizontal laser
V = vertical laser
S = slope function
Inserting the batteries
1
Open the battery compartment (3) and insert
the batteries in accordance with the installation
symbols, ensuring the correct polarity.
1
5
b
a
2
3 3
4 4
SuperPlane-Laser 3D
1H360° 2V360°
–
+
1 Laser emitting window
2 Slide switch
a ON
b OFF / Slope mode /
Transport lock
3 Battery compartment
(bottom)
4 1/4" tripod threads
(bottom)
5 Laser line selection button /
Slope mode on
When transporting always switch
!
off all lasers, secure the pendulum
and set the slide switch to "OFF"!
Low battery indicator: All laser lines flash
for 3 seconds and then go out when the
battery charge is low.
S
EN 07