Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain.This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Three-dimensional laser with a horizontal and two vertical 360° laser circles and
slope function for aligning tiles, wall studding, windows, doors etc.
General safety instructions
– The device must only be used in accordance with its intendedpurpose and within the scope
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
Do not stare into the beam!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
– Do not use the laser at eye level (1.40...1.90 m)
– In public areas shield off the laser beam with barriers and partitions wherever possible
and identify the laser area with warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limits in
accordance with the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity
of people with pacemakers – may apply. Electronic devices can potentially cause hazards
or interference or be subject to hazards or interference.
06
EN
Laser radiation!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014