English
D
E
C
Close and lock the quick-release
fastener by pushing it together.
D
Squeeze the hooks to open the
quick-release fastener.
30
Put on the shoulder strap.
5
5
4
3
1
2
Fasten and adjust the waist belt (1)
N
so that it rests comfortably on your
hips – thread the end of the belt
through the loop (2) – do not let it
hang down.
Adjust the harness straps (3) to the
N
correct length.
Adjust chest strap (4) to correct
N
length and fasten it.
If you use the upper cable ducts –
N
see "Positioning the Cable" – thread
the cable through the Velco
fasteners (5).
The back padding must fit firmly and
securely against your back.
Removing Harness
Open the quick-release fasteners
N
on the waist belt and chest strap.
5
Loosen the harness straps by lifting
N
the sliding adjusters and then take
5
off the battery.
Throwing Off Battery
3
WARNING
The battery must be quickly thrown off in
the event of imminent danger. The waist
belt and chest strap must be opened
before throwing the battery to the
ground.
Pouch
Accommodates adapter during work
breaks and after finishing work.
1
Secure the pouch (1) to the waist belt
only in the positions shown.
AR 900